Ammonia Gas Detector in Sewage Treatment Plant

In the production process of the sewage plant, a large amount of ammonia gas will be generated. Ammonia gas is an odor-less and color-less gas with a strong gas, which can damage mucosa of one's skin, eyes and respiratory organs. If too much ammonia gas is inhaled, lung swelling can be caused, which might be fatal. Many people have no idea about the function and operation principle of the sewage processing plant, let alone the large amount of nitrogen gas generated by the sludge generation process of the sludge treatment plant. In order to better learn potential causes of the nitrogen in the sludge treatment process, ordinary measures, such as gas masks and anti-corrosion wearing equipment, cannot fully guarantee safety. Therefore, ammonia gas detection of the sludge treatment plant is necessary and should take necessary precautions.

Since the independent detection scope of the ammonia gas detector should be within the range of 20 square meters to 30 square meters, production workshops and other similar places with a relatively airtight environment can well judge the quantity of ammonia gas concentration detector, as long as the environment square meter to be detected is around 20 square meters to 30 square meters.

Under the outdoor environment, the number of ammonia concentration detectors should be considered from the perspective of safety and precaution. At the moment, places (such as the pipeline interface and the pipeline interface) where leakage of ammonia gas is easy to happen and the places requiring safety detection must be installed with the ammonia gas detector. Under the condition, the number of ammonia gas detectors should be customized according to the specific environment.

Ammonia gas detector in sewage reatment plant

The online monitoring system of the sewage plant is made up of the ammonia gas detector and the alarm controller, of which the gas detector is installed on the operation site and the alarm control engine is installed in the environment for the convenience of the monitoring room's monitoring. As to the installation position of the ammonia gas detector for the sludge treatment plant, the location where ammonia gas leakage is easy to happen, or the location where the operation personnel’s operating environment will not be influenced, can be installed with the ammonia gas detector.

After the sewage plant finishes installing all equipment, debugging and test of the equipment are necessary which can ensure efficient detection of safety leakage, and immediate adoption of relevant measures. In this way, ammonia gas detection of the sewage plant can be realized effectively. Debugging of the ammonia gas detector is simple. As long as you get the detector connected with the power line, you can find whether the display of various probes and engines is normal. However, detection of the gas detector is also easy. Fetch a small amount of ammonia gas on the probe part of the ammonia gas detector. When the ammonia gas concentration appears and reaches the lower explosive limit, an alarm will be raised. If there is any equipment installed, the linkage device, including the solenoid valve and exhaust fan, can launched.